Position the material
Locate and secure the workpiece on the aluminum alloy table. CCD positioning supports alignment before marking.
Laser Equipment
UV Laser Marking
TekkaMark UV-XY
Go beyond a single marking field with coordinated X/Y movement.
TekkaMark UV-XY combines a 5 W UV laser with an automatic X/Y moving worktable and CCD positioning. The table moves the material beneath the marking head, supporting stitched layouts and repeated marking across larger workpieces.
- Laser source
- 5 W UV
- Work area
- 400 × 300 mm configuration
- Motion
- Automatic X/Y worktable
- Alignment
- 5 MP CCD camera
Media
Extended-area marking
One layout. Coordinated X/Y movement.
For a layout larger than one optical marking field, the system indexes the workpiece between marking positions. The usable stitched area depends on the configured lens, axis travel, fixturing, and part geometry; confirm your required size with Tekkaform.
Move, mark, and stitch
The servo-driven X/Y table moves the material under the laser head, enabling a prepared layout to be marked in successive fields.
Repeat across the workpiece
Build repeated marking arrays for panels and fixtures, or extend a layout across a larger part. Validate alignment and finish with a sample run.
Machine specifications
UV Marking Platform
- Laser type / powerUV / 5 W
- Configured working area400 × 300 mm
- WorktableAluminum alloy platform with automatic X/Y motion
- Drive systemPanasonic servo motors and drives
- Positioning5 MP CCD camera and dual red-light pointers
Stitching & Job Planning
- Extended-area workflowSuccessive marking fields with coordinated material movement
- Application focusLong layouts, repeated arrays, identification and detailed surface marking
- Maximum stitched sizeConfirm X/Y travel, lens field, workpiece dimensions, and fixture clearance
- Material compatibilitySample testing required for your substrate, coating, contrast, and finish
Full technical specification7 items
| Configuration Details | |
|---|---|
| Scanning head | SINO-GALVA |
| Focusing lens | Ronar Smith |
| Control | Ezcad / Zeus control software and board; confirm supplied version |
| Computer | Industrial computer included |
| Enclosure | Enclosed cabinet with door interlock and door-open alarm |
| Installation planning | Confirm electrical supply, extraction, guarding, and site requirements before ordering |
| Order configuration | Final working envelope, software compatibility, and acceptance criteria confirmed with your quotation |
Plan your marking application
Send us your material, artwork, and required marking size.
Tell us the part dimensions, material or coating, marking area, and production volume. Tekkaform will help confirm a suitable UV-XY configuration and sample-testing requirements.