Quick Answer
TEKKABEND-EX handles cutting, hollowing, and bending in one setup. In this video, a stainless steel sheet goes in — and a sculpted, hollowed letter form comes out. Cut, opened, and bent on the same machine, without the part ever leaving the station.
1. One setup, three operations
The machine starts with a sheet and finishes with a formed part. Cutting separates the outline, hollowing opens the inner shape, and bending brings up the return — all in sequence on one machine. For a sign shop, that means fewer transfers, fewer setups, and one part to track instead of three.
2. Watch the shape appear
The video shows the sequence directly: the cutter works the outline, opens an interior pocket, and steps the pattern until the letter form is free of the sheet. What reads as a decorative shape is actually tight control over the contour — the same control a channel letter return needs at every corner.
3. The finished part is the proof
The operator picks up the part, flexes the edge, and shows a clean cut surface. That small check says a lot: material that forms without cracking, edges that come off the machine ready for finishing. When a part behaves this way in a demo, the process is repeatable on the floor.
4. Material as it arrives
The sheet in the video is stainless steel with its protective film still on. Material handling, surface protection, and finish quality are decided before the part is ever mounted. A machine that works with the material as it arrives saves rework later.
5. What it means for a sign shop
Channel letter production is a series of steps that are only as good as the transfers between them. TEKKABEND-EX collapses cutting and forming into one flow, so consistency is built into the process instead of depending on setup alone.
Talk Through Your Letter Workflow
Every shop runs letters a little differently. Tekkaform works with sign fabrication teams to match equipment to the materials, letter styles, and workflow a shop actually runs.
Explore
Explore Tekkaform equipment: https://www.tekkaform.ca/products/